|
XJ 400S-AWorkover Rigs
Specifications
- Service Depth: 14,870’ / 2 7/8 tubing
- Workover Depth: 11,900’ / 2 7/8 tubing
- Max. static hook load: 225,000 lbs on 6 lines
- Rated HP: 450
- Mast clear height: 104’
The rig consists of seven parts, including a power
system, transmission system, chassis system,
drawworks system, mast and traveling system,
control systems (hydraulic, air, electrical), and
matching accessories. The main configuration of
this model rig is as follows:
- Power System: Engine Detroit Diesel Series 60 (450HPat 2100rpm)- Allison S5610 transmission. 1 100 gallon diesel fuel tank. Fire retardant muffler. Heat Exchanger.
Chassis System: 5 axle, Catwalk with stairs and handrails on operator side, one stand up tool box and 2 horizontal type tool boxes. Single man cab.
- Drive System: Right angle Gear Box, Drive Lines, two front steering axles and 2 rear driving axles and one air adjustable drag axle.
- Drawworks: Double drum with 42X12 tubing drum and 42X10 Sandline drum with self-energizing brakes. One 48X7 air actuated auxiliary disc brake. Both drums are splash water-cooled and the auxillary brake is air-cooled.
- Mast and traveling system: 104’Angle Iron Mast, Crown Assembly, Rod basket, Delayed action tubing board, mast incline indicator, folded mast base.
- Control System: (hydraulic, air, electrical) Main oil pump, steering oil pump, mast raising cylinder, mast scoping cylinder, 4 rig leveling jacks, 8,000 lbs service winch, Hydraulic oil tank. Air compressor, reserve tank, air drier, console box with adjustable operator platform.
- Accessories: Negotiable
The Dragon XJ400S-A model is a 5 axle carrier with
a single man insulated Cab. The rig is powered by a
Detroit Diesel Ser. 60 engine. Unless otherwise
ordered it will be set up at 450 HP@ 2100 rpm.
The transmission will be an Allison S5610 model.
The mast will be a 104’ 225,000lbs. on 6 lines. All
major components of the air and hydraulic systems
are of US origin.
NOTE: Engine, Transmission, and all major components of the
air and hydraulic system are of US Manufacture.
All rigs will be run tested and masts pull tested
with certification.
|
