|
|
130bbl Steel Vacuum Trailers
- Heavy duty suspension - all types available
- Double or triple axle options
- Steel or Aluminum hose pans
- Self contained pump units optional
- Internal baffles
- Exterior stiffener rings
- Adjustable King Pin
- Single or multiple compartments
- Bottom drain sump
- Rear bumper with tow eye
- Internal and external shut-offs
- ABS Brakes, LED Lights and the Industry's
- Finest Wiring Harness
Specifications
- Type: Vacuum Tank Trailer; Non-DOT Spec
- Capacity: 5460 Gallons, Plus 2%
- ICC MC: None
- Commodity: Unspecified Oilfield Fluids
- Design Pressure: 15 PSI Internal, 22 INHG External, 23 PSIG Hydrostatic Test
- Shell: 1/4" PL x 60" OD.
- Baffle: (2) 1/4" PL Flat Flanged and Dished Each with Interior Shell Reinforcement Ring
- Stiffener: 3/8" x 2 1/2" Rolled Rings (8) External
- Welds: Internal Root, External Submerged-Arc
- Compartment: Single
- Suspension: Hutch CH 9700 w/8 Leaf Low Arch Springs
- Axles: 22,500 LB Round with Outboard Drums
- Wheels: 10 Hole Steel Disc Hub Pilot
- Tires: 11.00 x 24.5 Radials
- Brakes: 16-1/2" x 7" with Spring Parking,Auto Slacks, ABS Both Axles
- Upper Coupler: Bolt on Adjustable
- Landing Legs: 2 Speed, Heavy Duty,High Capacity Lift
- Bumper: 4" x 8" Tube with Tow Eye
- Fenders: Full Length Formed
Hose Pan (10 GA) with 1/4" Formed Supports
- Tool Box: 18" x 18" x 36" on Driver's Side with Sealed Door
- Mud Flaps: Anti Sail
- Outlet: Two 4" Butterfly Valves at Rear with a Wedge Sump
- Reliefs: 1-1/2" Vacuum Relief, 2" Pressure Relief , both located at top front of barrel, 2" Blow Down Line at Rear
- Manways: Four located on Top, one on Rear Head, all 21" Domed Style with Plated Swing Bolts and Wing Nuts
- Shut Off: Ball Type Primary in Front Manway, Ball Type Secondary 12 Gallon on Driver's Side Front with Drain
- Lights: Full DOT Lights, Sealed Lights, Harness and Junction Box with
Terminal Stip, Two Rear Work Lights with Integral Switches
- Sight Glass: 2" Sight Glass Fittings in Front and Rear Head, 1-1/2" Plastic Sight Glass Tube installed in Rear Head with Clean Out Tees and 2" Ball Valves Top and Bottom
- Coating: All Surfaces White Metal Steel Grit Blast, 2.5 MIL Profile (SP-10), Interior Lined with Chemical Resistant 100% Solids Epoxy Liner, 10-15 MIL Dry Film Thickness. Exterior Coated High Build Epoxy Primer and Color Coated with High Solids Polyurethane, 4-6 MIL Dry Film Thickness
|
