|
|
150bbl Aluminum Vacuum Trailers
Specifications
- Type: Aluminum Vacuum Tank Trailer,
Non-DOTSpec
- Capacity: 6300 Gallons
- ICC MC: None
- Commodity: Unspecified Oilfield Fluids
- Design Pressure: 15 PSI Internal, 22 INHG
External, 23 PSIG Hydrostatic Test
- Shell: 1/4” Aluminum PLx 62” OD head:
3/8” Aluminium PL, ASME F&D Shape
- Baffle: (4) 3/8” Aluminum PLFull F&D
Shape
- Stiffener: Rolled Aluminum Channel rings
(13) External
- Compartment: Single
- Suspension: Two-Watson-Chalin
30,000 LB. air ride with single leveling
valveand manual dump valve, bolt on
steel suspension assembly,
60,000 LB.capacity system
- Axles: 25,000 LB 5" Round, 5/8" Wall
w/Outboard Drums (2)
- Wheels: 10 Hole Steel Disc Hub Pilot
- Tires: 11.00 x 24.5 Radials,
6005 LB Capacity each
- Brakes: 16-1/2" x 7" with Spring Parking,
Auto Slacks, ABS Both Axles
- Upper Coupler: Bolt on Adjustable
- Landing Legs: 2 Speed, Heavy Duty,
High Capacity Lift
- Bumper: 4” x 8” Tube with Tow Eye,
- Steel Hose Pan: 25' Aluminum, located
on each side
- Fenders: Aluminum, 3/4 front fenders,
full rear fenders
- Walkway: Formed supports, drivers side
safety walkway with handrails and ladder
- Tool Box: (1) - Drivers Side with
Sealed Door
- Mud Flaps: Anti Sail, Front and Rear
- Outlet: Two 4" Butterfly Valves at Rear
Head at Bottom
- Reliefs: 1-1/2" Vacuum Relief, 2" Pressure
Relief , both located at top front of barrel,
2" Blow Down Line at Rear, discharge
located behind fender
- Manways: Five located on top, one on
rear head, all domed style with plated swing
bolts and wing nuts
- Shut Off: Ball type primary in front manway,
ball type secondary on drivers side front
with drain
- Over turn protection: Three-Solid Plate type
over turn device, located at front,
center and rear
- Lights: LED Type, full DOTlights, sealed
lights, two rear work lights
- Sight glass: 2" sight glass fittings in front and rear head, 1-1/2" Plastic
Sight Glass tube installed in rear head with clean out tees and 2" ball
valves top and bottom
- Coating: All steel surfaces white metal steel grit blast, 2.5 MILprofile
(SP-100), coated high build epoxy primer and color coated with high
solids polyurethane, 4-6 MILDry Film Thickness
|
