|
|
7000 Gal Stainless Steel Vacuum Tanker
Specifications
- Type: Straight Round, Dot 407 Spec
-
Capacity: 7000 Gallons, Plus 2%
-
Compartment: Single
-
Commodity: Unspecified Fluids Design
25 Psi Internal
-
Pressure: 38 Psig Hydrostatic Test
-
Temp: 250 Deg F Maximum
-
Shell: 10 Ga, 316l Stainless Steel, 2b Finish
-
Head: 10 Ga, 316l Stainless Steel, 2b Finish,
Asme F&D
-
Baffle: None
-
Welds: Internal – Ground Flush, External – As Welded
-
Stiffener Rings: External Hat Channel, Solid
Welded
-
Manway: 20” Manhole, 6 Hold Down, Hypalon
Gasket In Lid, Near Center Of Tank,
Hinged To Front
-
Cleanouts: 2 – 3” Male Pipe Nipple With
Stainless Steel On Top Center
Line, Within 10” From Each Head
Seam
-
Over Turn Protection: Spill Dam At Top
Manway With Drain Hose,
Includes Relief Valve And Vapor Recovery Valve
-
Emergency: Betts 4” X 3”Hydraulic Operated
-
External
Valve: Pump Located At Rear, Fusible/
Frangible Breakaway Located At Front
-
Outlet Valve: Betts 3” Qrb Hydrolet With 90
Deg Outlet, 3” Spool Piping As Short As Possible
(If Needed). 3” Ss Cam Lock And Cap
With Retainer Cable
-
Vapor Recovery: 3” X 2 Tee Style Hydraulic
Operated Valve Sequenced with Emergency
Valve, Pressure Gauge Installed In Tank Connection
Pipe, Top Connection With Ball
Valve, Cam Lock And Cap, Drivers Side Connection
At Rear With Pressure Gauge, Ball
Valve, Cam Lock And Cap
-
Relief’s:Dot Specification, Fort Vale Stainless
Steel Pressure/Vacuum Relief Valve, Located
In Spill Dam With Air Kit And Gauge
-
Level Gauge: Garnet 808p2 Level Gauge With 316 Float
-
Thermometer: 0 - 3000 Deg Installed On Side
- Heating
System: Stainless Steel Channels
Full Length, 150 Psi Mawp,Steam And In Transit, Inlet
And Outlet At Front
-
Insulation: 6” Fiberglass Compressed To 5”, .080 Aluminum
Underlayment 24”
Wide
-
Jacketing: 22 Ga Ba/Ss, Lapped Seams, 18 Ga #4 Finish
Lock Seam Jacket
On Heads
-
Additional Components: All Bolsters, Long
Members, Sub Frame, Suspension Box, Bumper, Hose
Tube Mounts And Fender Mounts Constructed
From Stainless Steel
- Hose Tube: 2 – 8” X 21’ Hose Tube, One Each
Side
-
Ladder: Bolt On Ladder To Spill Box With Top Platform
Step And Grab Handles
(No Side Hand Rail) Installed On Curb Side. 19” Wide Walkway
To Cleanouts,
12 Wide On 3 Sides Of Spill Dam
- Lights: Full Dot Lights, Led Sealed Lights, Harness
And Junction Box With Terminal
Strip
-
Suspension: Hutch 9700 With 3 Leaf High Arch Springs
-
Axles: 25,000 Lb Round With Outboard Drums
-
Wheels: 10 Hole Steel, Hub Pilot
-
Tires: 11.00 X 24.5 Radial
-
Brakes: 16 1/2 X 7 With Spring Parking,
Auto Slacks, Wabco 4s-2m Abs System
-
Upper Coupler: 5/16” Bolster Plate,
Bolt On Adjustable, 49” Truck 5th Wheel Height
-
Landing Legs: 2 Speed, Heavy Duty, High Capacity
Lift
-
Bumper: Heavy Duty Per Dot Requirements
-
Fenders: 3/4 Fenders On Front, Full On Rear
-
Mud Flaps: Anti Sail
-
Placards: 4 – Slide In Placard Frames
|
