|
500 BBLRound Skid Tank
MAX LENGTH: 40'-7"
MAX WIDTH: 10'-6"
MAX HEIGHT: 11'-8"
Specifications
- Shell: 1/4" PL
- Heads: 1/4" PL, flanged and dished
- Base beams: 16" x 45 lb beam with
(5)16" x 45 lb crossmembers
- Pull pipe: 4" SCH 160 pipe each
end with caps
- Supports: (5) saddles with 3/8" PL
reinforcement pad
- Top hatch: (3) 20" x 20" hatch with locking
lid, one each end at ladder, one at tank
center
- Drain/fill: 8" manifold with hammer unions
and caps, (4) 4" pipe couplings, elbow turn
down to floor inside, 8" valve, 6" manifold
with hammer unions and caps, (4) 4"
couplings, 6" valve, 4" bottom suction on
each end with valve, 6" jet line with (4) 3"
discharges with 1 1/2" swedge nipples, jet
line thru each head
with 6" valve on manifold end and 4" valve
on clean out end.
- Manway: 21" manway clean out on end
- Ladder: One each end outside, one inside
at center hatch
- Finish: Interior steel grit blasted, coated
with 100% solids epoxy chemical resistant
lining (10 mil dft), exterior steel grit blasted,
coated with epoxy primer, top coated with
polyurethane color
- Hydrotesting: Full capacity static test
- Dimensions: Overall; 40'-7" long, 10'-6"
wide, 11'-8" high shell; 10'-6" dia, 31'-8"
head seam to head seam, 500 barrel
capacity
|
