|
Corrugated Wall/Liquid Storage Tanks
Dragon Model 500-Barrel Corrugated Wall, Liquid Storage Tanks
come equipped with new running gear, 10 mil DFTchemical resistant
liners. All tanks are steel grit blasted and painted to your specs. All
are built from new 1/4" Heavy Duty Corrugated Steel. You design,
we deliver.All models available now!
Specifications
- Floor: 1/4” PL, V-Bottom with integral formed
side channels
- Floor Support: 10" channel longitudinal
runners with 8" channel and formed 1/4” PL
channel crossmembers
- Walls: 1/4” PLsolid welded, corrugated
steel, corrugations 15" on center
- Roof: Flat top, 1/4” PLsolid welded with
channel supports outside
- Front/Rear: 1/4” PLsolid welded,
corrugated steel, 10" radius at vertical
outside corners
- Drain/Fill: 4" floor drain at rear end,
3" fill pipe to roof at rear, 4" suction line
connection at front, 4" mid high connection
at front, 8" flanged front manifold connection
with turn down to floor sump
- Manway: 21" manway on front, side,
(3) non-sealed hatches on roof
- Pick Up: Standard 5th wheel king pin
- Welds: All welds continuous except
substructure crossmembers
- Axle: 25,000 lb. axle with air brakes,
11.00 x 22.5 bias tires on steel disc wheels
- Access: Front stairway
- Finish: Per customer specifications
- Hydrotesting: Full capacity static test
- Dimensions: 45’ long, 8’-6" wide, 10’ high;
500 barrel capacity
- Tank pressure/
vacuum relief vent
- Level gauging
- Options:
Special tank
linings, special
sizes, open top
design, fixed or
removable steam
coils, 8" exterior
manifold
assembly
|
