|
|
Smooth Wall V-Bottom Liquid Storage
Standard Features
- 1/4" STEELPLATE TANK CONSTRUCTION
- SMOOTH INTERIOR WALLS FOR EASIER CLEANING
- V-BOTTOM FLOOR FOR BETTER DRAINAGE
- 3" FILLLINE
- MANWAYS CONVENIENTLYLOCATED ON FRONT, SIDE AND TOP
- 4" DRAINS AND FRONT INLET/OUTLET
- HEAVYDUTYNOSEBAR ASSEMBLY
- FLANGE MOUNT BLAYLOCK LL10 P/V VENT 16OZ PRESSURE, 0.4OZ VAC SETTING
- 2" COUPLING W/PLUG
- 4" FLANGE W/BLIND COVER
- 21" MANWAYDOMED LID AND BARS
- 3" ELBOW FILLLINE W/CAP
- SAFETYWALK WAY(36" GRATING)
- ACCESS STAIRS
- LEVELGAUGE W/8" STAINLESS STEELBALL “Y” SUPPORT HOLDS BALL1" MINIMUM OFF FLOOR
- FRONT DRAIN W/VALVE, THREADED FLANGE, PLUG, CHAIN
- 21" MANWAY, DOMED LID (2)
- 11.00 X 22.5 TUBLESS TIRE ON 10 HOLE STEELWHEEL
- FLOLDING HAND RAILS
- 4" FLANGE VALVE, THREADED FLANGE, PLUG, CHAIN REMOTE OPERATION HANDLE
- 25K AXLE, AUTOMATIC SLACK ADJUSTERS, TOPMOUNTED 30 SERVICE CHAMBERS, OUTBOARD DRUMS, HUTCH 9700 SUSPENSION, 3 LEAF HIGH ARCH SPRINGS
- DOT TAILLIGHTS AND LOWER MARKET LIGHTS, NO TOPLIGHTS
- 4" COUPLING W/PLUG
Specifications
- Floor: 1/4” PL, V-bottom with integral
formed side channels
- Floor Support: 10" channel longitudinal
runners with 8" channel and formed 1/4 PL
channel crossmembers
- Walls: 1/4” PLsolid welded, smooth inside,
with formed channel supports outside
- Roof: 2-step design, 1/4” PLsolid welded
with channel supports outside
- Drain/Fill: 4" drain at floor each end, 3"
fill pipe to roof at front, 4" connection on
front, 8" flanged front manifold connection
with inside flange, 4" connection on roof
- Manway: 21" manway on front, side,
and (2) on roof
- Pick Up: Standard 5th wheel king pin
- Welds: All welds continuous except
substructure crossmembers
- Axle: 25,000 lb. axle with air brakes, 11.00 x
22.5 bias tires on steel disc wheels
- Finish: Per customer specifications
- Hydrotesting: Full capacity static test
- Dimensions: Overall: 42' long, 8'-6" wide,
11' high; 500 barrel capacity
- Tank pressure/vacuum relief vent
- Level gauging
- Options: Special
tank linings, special
sizes, open top
design, fixed or
removable steam
coils, 8" exterior
manifold assembly
|
