|
Truck Transfer and 10 Wheel Box
Specifications
- CAPACITY: 13.5 cubic yards
(approximately)
- WEIGHT: 3,825# (approximately)
- Paiint: Polyurethane
- BODYHEIGHT: 6 over (42.5 floor to
top rail) up to 18 over
(54 floor to top rail).
- BODYLENGTH:15 (other lengths
available)
- BODYMATERIAL: 10 gauge Hi-tensile
steel (other options available)
- BULKHEAD: 10 gauge Hi-tensile
steel (other options available)
- HYDRAULIC HOIST: 135 Four stage
- TAILGATE: Air-lift gate 4 cylinders
10ga. Hi-tensile
- GATE CONTROLS: Actuated from
truck cab
- FENDERS: Steel welded on
- TARPHOOKS: None
- LADDERS: On driver side front
of bulkhead
- ELECTRICAL: DOTapproved 12 volt
sealed lighting system
- PLUMBING: DOTapproved system
- UNDER MOUNT: Sub frame with
hydraulic tank
- AIR FLAPS: Standard.
B Trailer Tub
- CAPACITY: 13.8 cubic yards
(approximately)
- WEIGHT: 2,750 lbs. (approximately)
- Paiint: Polyurethane
- BODYHEIGHT: 6 over (48 floor to
top rail) up to 12 over
(54 floor to top rail).
- BODYLENGTH: 15
- BODYMATERIAL: 10 or 12 gauge
Hi-tensile steel (other options available)
- BULKHEAD: 10 gauge Hi-tensile
steel (other options available)
- TAILGATE: Manual swing gate with
bearing hinge pins
- TARPHOOKS: None
(available option)
- STEPS: Option - Front and or rear
of tub
- DRIVE: 1-A2 Stud 12 volt
- GEAR BOX: 25 to 1 Gear Ratio
- BATTERY: 12 v Deep Marine Battery
|
