|
Heavy Duty Over and Under Rolling Lid
| CONT. |
A |
B |
| 20 YD |
41 |
53 |
| 25 YD |
53 |
65 |
| 30 YD |
65 |
77 |
Specifications
- Floor: 3/16” PLone piece
- Crossmembers: 3 x 4.1 channel 16"
on center
- Walls: 3/16” PLone piece with tubing
top rail, inside liner hooks
- Door: 3/16” PLwith tubing frame
- Front: 3/16” slant formed
- Pickup: Standard cable with 2” x 6” x 1/4”
rails, gusset at each crossmember
- Wheels: (4) 10” DIAx 9 long with grease
fittings
- Door Latch: (3) Independent ratchet binders
with chains, vertical second latch
- Gaskets: Extruded rubber seal with metal
retainers
- Welds: All welds continuous except
substructure crossmembers
- Finish: Coated inside and out with direct to
metal, rust inhibiting acrylic enamel color coat
- Hydrotesting: Full capacity static test
- Dimensions: 22'-11' long (21'-8' inside) 99"
wide (88" inside), see drawing for height
- Options: Steel grit blast and special paint,
Ampliroll, Heil and Dino pick up
- Roof: 3/16 PLroof panels with tubing and
channel support frame
- Lids: (2) 68" x 90" metal rolling lids spring
loaded, self-raising
- Rollers: 4" V-groove rollers with delrin
bearings and grease fittings
- Opening: (2) 60" x 82" openings with 8"
divider centered on container
- Latch: (2) independent ratchet binders
with chains per lid
- Gaskets: Extruded rubber seal with
metal retainers
|
