|
Heavy Duty Split Metal Rolling Lid
| CONT. |
A |
B |
| 20 YD |
41 |
53 |
| 25 YD |
53 |
65 |
| 30 YD |
65 |
77 |
Specifications
- FLOOR: 3/16” PLone piece
- CROSSMEMBER: 3 x 4.1 channel 16" on
center
- WALLS: 3/16” PLsolid welded with tubing
top, inside liner hooks
- DOOR: 3/16” PLwith tubing frame
- FRONT: 3/16” PLslant formed
- PICK UP: Standard cable with 2” x 6” x 1/4”
rails, gusset at each crossmember
- WHEELS: 10 DIAx 9 long with rease fittings
- DOOR LATCH: 3 Independent ratchet
binders with chains, vertical second latch
- GASKETS: Extruded rubber seal with metal
retainers
- WELDS: All welds continuous except sub-
structure crossmembers
- FINISH: Coated inside and out with direct to
metal, rust inhibiting acrylic enamel color coat
- HYDROTESTING: Full capacity static test
- DIMENSIONS: 22'-11" long (21'-8" inside),
99" wide (88" inside), see drawing for height
- OPTIONS: Steel grit blast and special paint,
Ampliroll, Heil and Dino pickup
- ROOF: 3/16” PLroof panels with tubing and
channel support frame
- LIDS: (2) 68" x 90" metal rolling lids spring
loaded, self raising
- ROLLERS: 4" V-groove rollers with delrin
bearings and grease fittings
- OPENING: (2) 60" x 82" openings
with 8" divider centered on
container
- LATCH:(2) independent
ratchet binders with chains
per lid
- GASKETS: Extruded rubber
seal with metal retainers
|
