|
|
Roll-Off Hoist
Minimum Recommended Truck Specifications
- Front Axle: 16,000 lb. with Power Steering
- Rear Axles: 44,000 lb.
- Section Modulus: 32 in3
(for 36,000 PSI chassis frame)
- 24 in3(for 55,000 PSI or more chassis frame)
- Total Bending Moment (both frame channels):
2,400,000 IN-LBS
Options
- 30 Aluminum Toolbox
- Lengthen Truck Frame Tarper
- Pintle Hook, Air and Electrical Connections Wet Kit
- Hoist up Alarm
- Customized Paint Minimum Recommended Truck Specifications
Specifications
- Model:TR6-OR-184 (24 ft. Tilt frame) 16 ft. 22 ft. Containers TR6-OR-196 (25 ft. Tilt frame) 16 ft. 24 ft. Containers
- Capacity: 60,000 or 75,000 lbs.
- Tilt Frame:8 x 4 x 12 Structural Tubing Outside Rail Configuration: 35 O.D.
- Sub Frame: 4 x 2 x 3/16 Structural Tubing
- Attached Hydraulic Plumbing
- Pump: Direct Mount 30 GPM
- PTO: Air Shift with Signal Light Note: Hot Shift P.T.O. required on all automatic transmissions
- Controls: Inside and Outside Controls
- Lift Cylinder & Reeving Cylinder: 6 Bore x 3 Rod x 84 Stroke (60,000 lbs.) or 7 Bore x 3 Rod x 84 Stroke (70,000 lbs.)
Interchangeable Design
- Hydraulic Valve: VA-20 (40 GPM)
- HydraulicTank: Steel 50 Gallon
- Operating Pressure: 2,000 P.S.I. Max.
- Dump Angle: 49 deg.
- Cable:7/8 Dia. EXIWRC 6 x 37 1 dia. X 8 Weldless Alloy Link End
- Rear Fenders:Stainless Steel or Poly
- Side Rollers: 4 O.D. Greasable with SAE 660 Bronze Bushings (5) per side
- Bumper: Automatic Fold-Up ICC Bumper
- Available as a Ship-Out complete unit or Factory Installed at one of our locations.
|
