|
|
Vacuum Box
Specifications
- FLOOR: 1/4” PLone piece
- CROSSMEMBER: 3 x 4.1 channel
12" on center
- WALLS/ROOF: 1/4” PLsolid welded,
inside liner hooks
- STRUCTURE: Tubing and formed channel
supports rated to operated at 30" hg
- DOOR: 1/4” PLwith tubing frame
- FRONT: 1/4” PLwith push plates
- PICK UP: Standard cable with 2” x 6” x 1/4”
rails, gusset at each crossmember
- WHEELS: (4) 10” DIAx 9” long with
grease fittings
- DOOR LATCH: (4) independent ratchet
binders with chains, vertical second latch
- GASKETS: Extruded rubber seal with
metal retainers
- WELDS:All welds continuous except sub
structure crossmembers
- FINISH: Coated inside and out with direct
to metal, rust inhibiting acrylic enamel
color coat
- HYDROTESTING: Full capacity static test
- DIMENSIONS: 22'-11" long (21'-8" inside), 94"
wide (83" inside), see drawing for height
- OPTIONS: Steel grit blast and special paint,
Ampliroll, Heil and Dino pick up
|
