25 BBL DNV Cutting Boxes

click to enlarge click to enlarge click to enlarge

Constructed in accordance with DNV certification No. 2.7-1 and US D.O.T. 49 CFR 176.340 for combustible liquids.

Exterior high strength frame with interior compartment tank. Meets Charpy Impact requirements for cold weather service (design temp. -20°C, -4°F). Lift lugs meet dimensional requirements for 7/8 inch shackles.

The Tiger 25 BBL DNV Cutting Box is designed for offshore dynamic lifting in accordance with the provisions of DNV 2.7-1, EN 12079, API RP 2A and SEPco document OPS0055.

Specifications

• DNV Type Certificate S-3317
• Hinged and gasketed lids secured with flange nuts and swing bolts
• 3/8 inch plate floor, walls and top
• Top lift eyes with stacking pads
• 4-way fork pockets
• Pressure relief vent
• Two 4 inch camlock fill ports
• One 6 inch inspection port
• Hot dip galvanized coating on all surfaces
• Sling angle 45 degrees
• Container design pressure 10 PSI
• Container gross weight 30,000 LBS.
• Container tare weight 5,480 LBS.
• Safe working load weight 24,520 LBS.
• Product density 23.4 LBS./GAL. (specific gravity of 2.8)
• Base Dimensions 84" x 96"
• Height 52 inches to top lift eye
• Inside dimensions 75" x 83" x 30"
• Product tested at 3 PSIG Internal with Air

Click here for 25 BBL DNV Cutting Box Line Sheet